search
English 中文

STB66 Battery Charger Control Board 12 Pulses Gate Control

3 phase 12 pulse, LCD interface. Four charge steps are pre-charging, fast charging, slow charging or floating charging, users can set freely according to their own needs. 380V input, 1000A trigger capacity.

STB66 battery charge control trigger board adopts 32-bit industrial grade high-performance microprocessor, highly digital military quality design, supports network remote control and on-site control mode. The fuzzy-PID parameter is open-ended, fault alarm and parameters are displayed on the LCD screen or touch screen menu Chinese, parameters are automatically saved after setting. With constant voltage and constant current regulation, the charging operation parameters are set by the LCD screen. The charging phase can be set up in four stages, each stage are set independently: charging current, charging voltage, current limit, charging time and jump voltage, support one-stage discharge parameter setting, users can set the charging parameters of pre-charging, fast charging, slow charging or floating charging according to the current battery charging curve freely. The operation is reliable, technology is advance, functions are complete, performance is stable, debugging is convenient and easy to maintain.

Technical specifications
◆ Working power supply: 380Vac ±15%,  50/60HZ
◆ Main circuit working voltage: 50~380Vac ±15%,  50/60HZ
◆ Voltage adjustment range: 1 ~ 300V
◆ Current adjustment range: 1 ~  300A
◆ Phase shift range: 0~178°
◆ Adjust output resolution: 1/4000
◆ Stability accuracy: better than ±1%
◆ Trigger current: ≥ 750mA
   Trigger capacity: ≤ 1000A thyristor
◆ PID dynamic response time: ≤ 50mS
   Overshoot: ≤ 10%
◆ Input signal: DC0-5V, DC0-10V, 0-10mA, 4-20mA, 10K potentiometer adjustment
◆ Three-phase trigger imbalance: ≤ 0.3°
◆ Applicable load: Battery charge load
◆ Alarm relay contact capacity: 250Vac/10A
◆ Dielectric strength: 3500 VRMS
   Ambient (working) temperature: -20°C~ 60°C
   Working Relative humidity: ≤ 90% RH (no frost)
   Indoor installation requirements: no flammable, no explosive, no corrosive gas, no conductive dust, and vibration should be less than 0.5G
◆ Dimensions: 240 * 160 * 50 mm
   Dimensions between install holes: 225 * 145mm
◆ Weight: 1.3 Kg
◆ Altitude should be under 3000m, otherwise need to reduce the capacity level. 


Relevant peripheral accessories and products:
STP30 Constant Voltage Feedback Module
STP10 RC Absorption mModule
STP20 Three Phase Synchronous Transformer ModuleSTP22 6 Pulse Trigger Module
STP01 LCD Operation Display Screen ModuleSFP20 IGBT Driver Module
>> More Accessories
>> Return


------------------------------------------------------------------------------------------
If you want to buy our products, you can easily contact us by the following two ways:
1、Welcome to Sinepower Sales Consulting Hotline: +86 18938061832;
2、You can also fill in an online consulting form to tell us some of your information. The more we know about you, the more thoughtful service you can be provided.
If you encounter with some problems in the using process, please use QQ online to communicate with us, you can also email sales@sinepower.cc for feedback!


 

[!--temp.left2en--]